LIARD FIREBOX™

The professional portable outdoor, wood burning firebox.

A Swiss engineered, warp- and rust-free firebox for outfitters, hunters and trappers, canoeists and other outdoor enthusiasts!

Click on an image to
see it in a larger format.

The LIARD FIREBOX is very easy to assemble ...

Place the bottom tray (1) on the ground.

Place the two side walls (3) vertically on each side of the ground tray (1).

Insert the back wall (4) vertically between the two side walls (3).

Insert the fire tray (2) into the bottom tray (1), with the lowest edge in the front.

Put the grill plate (5) on the top with the 45^o bent edge in front.

Tip:

It is easier to light a fire in the LIARD FIREBOX before placing the grill plate on top. Take care when adding the grill plate after a fire has been lit.

Tip:

By turning the entrance of the LIARD FIREBOX into or out of the wind, you can help control the intensity of your fire.

Click on an image to
see it in a larger format.

… and to pack and store.

Take the fire tray (2) out and safely dispose of the ashes. Always use protective clothing.

When cooled, remove the grill plate (5) then both side walls (3) and the back wall (4).

Place the side walls (3), then the back wall (4) into the bottom tray (1).

Place the fire tray (2) over (3) and (4) into the bottom tray (1).

Cover with the grill plate (5).

Pack it inside the carrying pouch.

Tip:

You can place protective gloves, matches, fire starter and other useful material inside the packed LIARD FIREBOX. Please note, the package is not entirely waterproof, so protect these items accordingly.